| Description | |
| Brand Name | AIBO Quartz |
| Products | Quartz slab/Engineered stone /Artificial stone, Quartz cut-to-size,
Quartz countertop/Quartz benchtop/Quartz worktop/Quartz desk top
/Quartz table top , Quartz island, quartz vanity top, Quartz
kitchen top , Quartz tile for floor etc. |
| Color | Calacatta Color , Marble Series , double & multiple, pure Color ,
small grain particles colors, colors customized colors. |
| Slab Size Available | (2800-3200)mm*(1200-1600)mm |
| Cut Tile Sizes | 400*400, 600*600, 800*800 mm |
| Tone & Figure | Consistent |
| Flatness | <0.1mm |
| Angle | <0.2mm |
| Density | 2.3~2.5g/cm3 |
| Water Absorption | <0.05% |
| Flexural Strength | 25~35Mpa |
| Size | Quartz slab: 3000 X 1400mm, 3000 X 1600mm, 3200 X 1600mm, 3200 x 1650mm, etc. |
| Quartz cut-to-size: 1200mm X 1200mm, 1200mm X 800mm, 800mm X 800mm, 600 X 600mm, 600 X
300mm, 300 X 300mm, etc. |
| Quartz countertop: 25.5"X96", 26"X96", 25.5"X108", 26.5"X108", 28"X96", 28"X108". |
| Quartz island: 96"X36", 76"X36", 98"X42", 76"X42", 86"X42". |
| Quartz vanity top: 25"X22", 31"X22", 37"X22", 49"X22", 61"X22". |
| Thickness | 15mm, 18mm, 20mm, 30mm. |
| Finish | Surface Finish: Polished.Honed .rough finish . leather finish . |
| Side Finish: Flat, Stright, Bevel, Bullnose, Full Bullnose, Ogee,
etc. |
| Application | Counter tops, kitchen tops, bathroom vanity top, worktops, laundry,
table tops, bench top, island tops, bar tops, backsplashes, shower
stalls, tub surrounds ,wall tile, wall cladding, floor tile |
| Application Place | Airport, Station, Shopping Mall, Hotel, Bank, Hospital, Apartment ,
Commercial Residential . |
Quartz Stone Top
Quartz Stone Top can be used for table top, island, kitchen
countertop, vanitytop, bartop, round table. And the quartz stone
tops edges are the same with natural stone, the edges can be eased
edge, bullnose edge, laminated edge, miter edge. Besides, the
quartz stone top also can make normal sink cutout, undermount sink
cutout, faucet hole, etc.
| Description | Artificial Quartz Stone |
| Material | High purity acid-washed 93% quartz stone grain, 7% resin and a
small proportion of inorganic pigment. |
| Thickness | 6mm-8mm-10mm-12mm-15mm-18mm-20mm-25mm-30mm, etc. |
Finish | 1. Surface: Honed, Polished/Nano |
| 2. Side Finish: UV Cutting. |
| Color | The pure series, diamond series and multi color series, acailable
in all designs and colors. |
| MOQ: | 1x20"container,, mixed order accepted. |
| Payment Terms: | T/T or L/C. |
| Delivery Time: | 25 days after receiving the deposit. |
| |
1. Thickness: Quality allowed ±1 mm. In production, we will measure
the thickness three times to make sure it is qualified.
2. Size: We will make the slab 20mm longer and wider to make up the
lack of corner problem that possiblely happen.
3. Production line QC will inspect the slab surface meter by meter
to make sure the there are no bubble and other quality problem.
4. General QC will inspect the quality again, to make sure the
whole quality is good.
5. We supply two years's quality warranty, if you found any quality
problem within two years after you received the slabs, you can
contact with our saler.
